![]() ![]() Committing the DHCPD configuration ( ztp request dhcpd-commit) automatically compiles/saves the DHCP configuration and restarts the DHCPD service. After configured, you will need to commit the ZTP DHCPD configuration. If you want to use the automatically generated DHCPD scope (the new switches will be on the same VLAN as one of FreeZTPs interfaces), you just need to specify a first and last address for the lease range. The created DHCPD scopes will be inactive to serve DHCPD as they will have no addresses available to lease. #KEYSTORE EXPLORER 4.1.1 INSTALL#After this range is added and the DHCPD service restarted, you can connect the ZTP server directly to the switch (on any of its ports), power on the switch, and watch it go!ĭuring installation, ZTP will install the DHCPD service, detect the network interfaces in Linux, and configure DHCPD scopes for each of the interfaces. You will need to add this IP range in order to enable the DHCPD service to hand out IP addresses (see below instructions). The only part missing on the configuration is an IP lease range for DHCPD. You can view the configuration (after installation) by issuing the command ztp show config. The ZTP server comes with an fully functional default configuration, ready to serve out a basic config to switches. You will need to logout and log back into your SSH session to activate this completion script. The installation will also install a CLI completion (helper) script.FreeZTP will perform the install of the packages and services for full operation. ![]() Make sure the machine has internet access as this process will download and install several packages for this to happen. Run the FreeZTP program in install mode to perform the installation: sudo python ztp.py install.Change to the directory where the FreeZTP main code file (ztp.py) is stored: cd freeztp.Download the FreeZTP repository using Git. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |